Plumbing Fixture Installation in Aurora
Denver Metro Flows Better
Signs It's Time to Replace a Fixture
Most plumbing fixtures don’t fail suddenly. They give you signals first — drips that don’t stop, stains that keep coming back, handles that no longer work the way they should. These are the signs Aurora homeowners describe when they call us for a replacement:
- A faucet that drips even after being tightened or repaired more than once. If the same faucet has been repaired twice in the past year, the internal cartridge or valve seat is worn past the point of reliable repair. A replacement faucet lasts 15–20 years. Another repair buys you 6 months, maybe less.
- A sink with visible cracks, chips, or porcelain loss that’s creating hygiene concerns. Once porcelain chips, the exposed material underneath absorbs stains permanently. A cracked sink basin also creates hidden moisture pathways that lead to cabinet damage and mold over time.
- A toilet that runs continuously or requires multiple flushes. A running toilet wastes between 200 and 700 gallons per day. If the running has returned after replacing the flapper, the fill valve or the entire flush mechanism may be corroded or mis-seated — at that point, a new toilet is both the cleaner and more economical solution.
- A shower valve that can’t regulate water temperature reliably. If your shower runs scalding or freezing despite adjusting the handle, the pressure-balancing cartridge inside the valve body has failed. Depending on the brand and the age of the valve, replacement of the full valve is more reliable than cartridge repair alone.
- Fixtures in a pre-1990 home that have never been replaced. Homes in Aurora Hills, Heather Ridge, and areas north of East Colfax built before 1990 frequently still have original faucets, sink drains, and toilet internals. These parts are at or past their expected service life. A proactive replacement — especially during a renovation — prevents emergency calls later.
The pit that houses your sump pump and the line that carries water away from your home are as important as the pump itself. When either fails, even a perfectly functioning pump can’t do its job.
A properly installed faucet has tight connections at the supply lines, a seated gasket that won’t shift over time, and shutoff valves that actually function. MileFlow checks all three on every installation.
Faucet types we install:
- Kitchen faucets: pull-down, pull-out, touchless, single-handle, and filtered water faucets. Includes basket strainer hookup if replacing a kitchen sink faucet.
- Bathroom faucets: single-handle, widespread (two-handle), centerset, and wall-mount styles where the existing plumbing supports them.
- Shower and tub faucets: single-handle pressure-balance, thermostatic, two-handle, and tub-only spout replacements. Trim-only swaps and full cartridge replacements both available.
- Utility and laundry room faucets: two-handle and single-lever utility faucets for laundry sinks, utility basins, and service sinks.
Faucet repair is also available:
If your faucet is dripping, running, has low pressure from one side, or has a handle that’s loose or won’t close fully, MileFlow can assess whether repair or replacement is the better call. Most faucet repairs and cartridge replacements are completed in under two hours.
A toilet that isn’t leveled, seated fully on the wax ring, or connected with a working supply line and shutoff is a source of slow leaks that damage the subfloor over months before becoming visible.
Toilet types we install:
- Standard and comfort-height (ADA) toilets: two-piece and one-piece configurations. Comfort-height toilets (17–19 inches seat height) are the most requested replacement in Aurora homes for homeowners 50 and older.
- Dual-flush toilets: water-saving models that use 0.8 gallons for liquid waste and 1.6 gallons for solid. Particularly practical in Aurora, where Arapahoe County encourages water conservation.
- Elongated bowl toilets: Replacing a round bowl toilet with an elongated one requires confirming rough-in distance and bowl clearance before purchasing the new fixture.
Replacing a toilet in a pre-1985 home? Aurora’s older homes sometimes have 10-inch or 14-inch rough-in distances rather than the standard 12 inches. MileFlow measures the rough-in before you purchase the replacement toilet to prevent a return trip.
Your shower has two separate things that can need replacing: the visible parts you touch every day — the handle, the showerhead, the tub spout — and the internal valve hidden inside the wall that controls water temperature and flow.
What we replace and install:
- Showerheads — standard, rain-style, hand-held, and multi-function
- Tub spouts and diverters (the piece that redirects water from tub to shower)
- Shower handles and trim kits
- The internal valve when it’s causing temperature or pressure problems
- Full shower setups during bathroom renovations
A garbage disposal looks simple from the outside, but a proper installation connects four things at once: the mounting under the sink, the drain, the electrical outlet, and in many cases the dishwasher line. MileFlow handles all of it
What we do:
- New installation: includes mounting, drain connection, electrical hookup to the switched outlet, and test run. If the existing outlet or wiring doesn’t meet code, we note it in the report.
- Replacement: disconnect of the old unit, installation of the new disposal, reconnection of drain and electrical. Most replacements are completed in under two hours.
- Reset and repair: if a disposal hums but won’t spin, jams, or leaks at the flange, MileFlow diagnoses the cause before recommending repair vs. replacement. A jammed disposal is often a 15-minute fix
Don’t flip any switches. Walk out. Call from outside: (720) 601 4450 or 911. We handle gas line emergencies with detection equipment and carry fittings for same-visit repairs.
Request a quote today
Ready to solve your plumbing problems? Submit your information below and let our experienced team take care of the rest.
What Every Fixture Installation Includes
You call or schedule online
We confirm a same-day or next-day appointment window with a two-hour arrival range. If you're scheduling around a countertop install, delivery window, or renovation timeline, tell us and we work around it.
The technician reviews the fixture and the existing connections.
Before removing anything, we check the shutoff valves, existing supply lines, drain condition, and confirm the new fixture dimensions are compatible with the rough-in. If anything needs attention — a corroded valve, a drain that's not to code — you know before work starts.
You receive a written estimate
If the scope is standard (fixture-for-fixture replacement), the estimate is straightforward. If complications are found during the assessment — a shutoff that needs replacing, a drain that needs a trap adjustment — those are priced and listed separately. Nothing happens without your written approval.
Installation is completed to finish condition
We install the fixture, connect all supply lines and drain connections, apply sealant where required, and verify mounting is solid and level. Work areas are cleaned before we leave.
Leak test and function check before we close the job
We run water through every connection, check the drain for flow, and confirm the fixture operates correctly.
Why Aurora Homeowners Trust MileFlow for Tankless Installation
- Colorado-Licensed & insurance plumbers
- Written Workmanship Guarantee
- We Diagnose Before We Recommend
- Upfront Plumbing Pricing With No After-Hours Fees
Happy clients who received our services
Frequently asked questions
Yes — and most customers do. MileFlow installs homeowner-supplied fixtures from any brand. The only thing we ask is that you let us know the brand, model, and configuration before the appointment so we can confirm compatibility with your existing rough-in connections and bring any necessary transition fittings. If a supplied fixture turns out to be incompatible with your existing plumbing, we document the issue and give you options before any work begins.
A standard faucet replacement on an accessible sink runs 1 to 2 hours. A kitchen sink with drain, basket strainer, and faucet takes 2 to 3 hours. Toilet installation is typically 1 to 2 hours. Shower trim-only replacement takes about 1 hour. A full shower valve replacement — which requires wall access — runs 2 to 4 hours depending on access conditions. We give you a time estimate when we scope the job so you can plan your day.
For like-for-like replacements — a new faucet in place of an existing faucet, a new toilet in the same location — Aurora and Arapahoe County do not require a permit. Permit requirements apply when the work involves relocating or adding new drain or supply lines, changing the rough-in location, or adding a new fixture to a space that didn’t previously have one. If your project involves structural or layout changes, MileFlow identifies the permit requirement during the assessment and handles the application before work begins.
MileFlow installs all major residential fixture brands: Delta, Moen, Kohler, American Standard, Pfister, Grohe, and Hansgrohe. We also install InSinkErator, Moen, Waste King, and KitchenAid disposals. For customers who want brand or model recommendations based on durability and Aurora water conditions — the city’s water has moderate hardness that affects some fixture finishes over time — we can advise before you purchase. There’s no obligation to buy from us; the recommendation is just part of doing the job well.
Ready to Get Your Fixture Installed? Let's Schedule Today.
MileFlow handles the full installation—supply connections, drain hookups, leak testing, and a written guarantee—before we leave. Same-day scheduling is available most days across Aurora.